When installing your Tectonic cover, if you find that you are having issues getting the panel to latch, there are a couple things to check.
First off, be sure you are dropping the panel from two feet, and pressing firmly on the corner that is not latching. If it latches at this point, leave the cover in the closed position for 24-48 hours to allow your seals to break in.
If the panel still isn’t latching, then loosen the two mounting brackets on the rail closest to the cab end where the panel is not fully latching. Then push up on the rail roughly 1/16" and re secure the clamps. Your panel group should latch now! If your panel continues to not fully latch then contact us by email at support@peragon.com or by calling us at 877-473-7246. For safety reasons, we recommend not driving with your panels installed until the latching issue is solved.