Panel Height
When folded up, the panel stack is almost 8.5" high.
Panel Width
The following indicates the width of the panels for each specific truck. The measurement is taken from the mid-panel, which include the gutter rails.
Colorado/Canyon 5'0" Beds - 25 inches
Chevrolet/GMC 1500 5'8" Beds - 28 inches
Chevrolet/GMC 1500 6'6" Beds - 30 inches
Chevrolet/GMC 2500/3500 6'10" Beds - 31 inches
Ford F 150 - 5"6" Beds - 27 inches
Ford F 150 - 6'6" Beds - 31 inches
Ford F 250/350 Beds - 31 inches
Ram 1500 5'5.5" Beds - 27 inches
Ram 1500 6'2" Beds - 29.75 inches
RAM 2500/3500 Beds - 29.75 inches
Tundra - 5'6" Beds - 27 inches
Tundra - 6'6" Beds - 31 inches
Clearance under Panels
Items in your bed need to be at least one inch below the top of your truck bed rails in order to clear the underside of our panels.
Panel Weight
Removing the panels are quick and easy when needing access to the entire bed. Each panel itself weighs roughly 30 lbs, with the whole stack weighing in at roughly 90 lbs.
Rail Width
The rails stick into the bed about 2 1/4".
Clamp Locations
The following shows where the clamp slots are located on the side rails for your specific truck. The measurements are taken at the middle of the slot, in inches, from the cab end to the tailgate end of the rail. Each slot is approximately 1.5 inches wide.
If you are looking for information about the room needed to retract with our Landmark™ retractable, please view this link: https://support.peragon.com/hc/en-us/articles/360047699674-How-Much-Space-is-Needed-for-the-Cover-to-Retract