Here's the information for replacing the bracket(s) on your Landmark™ cover.
1) Remove panel assembly.
2) Use a 3/16" drill bit and remove the rivets.
3) Remove and replace the bracket.
4) If provided with stainless steel screws, these will be used to fasten the bracket to the panel. You will need a 3/8" wrench and a 1/8" allen wrench for threaded fasteners. If provided with rivets, your bracket requires that low profile fastener. Use the supplied rivets to fasten the bracket to the panel. You will need a pop rivet tool with a narrow nose piece.
5) Reinstall the panel assembly.
If you have any questions, please reach out to us at support@peragon.com or give us a call at 877-473-7246.